Aqara Roller Shade Driver E1 – Global Edition
$ 69.73
- Description The Aqara Roller Shade Driver E1 is a retrofit motor that automates the roller, zebra and venetian blinds you already have — it drives the existing beaded chain, so there is no need to replace the blind. Fit it in about five minutes, run it on its rechargeable battery or over USB-C, and control your blinds from the Aqara Home app, with Siri, Alexa or Google, or on a schedule. Model RSD-M01. Why buy the Roller Shade Driver E1 in Singapore Keeps your existing blinds. A retrofit driver for beaded-chain roller, zebra (Korean) and venetian blinds — no need to buy new blinds. Five-minute install. Three steps: screw or stick it to the wall, attach the adapter for your bead size, insert the chain. Battery or wired. A built-in rechargeable battery lasts about two months per charge, or run it permanently from the included USB-C cable. Automate your light and privacy. Schedules, sunrise and sunset timing, pre-set open positions, and sensor-driven automations through your hub. Works with your smart home. Zigbee 3.0 through an Aqara hub, with Apple Home, Alexa, Google Home and IFTTT. Quiet, tidy retrofit. A slim wand sits beside the blind and drives the chain — with bead-size adapters included. A retrofit driver for beaded-chain blinds The Roller Shade Driver E1 works with blinds that raise and lower on a beaded chain — roller blinds, zebra (Korean) blinds and venetian blinds with plastic or metal beads 3 to 6 mm thick. It drives that chain for you, so your existing blind stays in place. Four adapters are included to match the common bead sizes, and the motor delivers 0.45 N·m of torque — enough for a shade of up to 5 kg on a 38 mm tube, or 3.7 kg on a 28 mm tube. Before buying, just check your blind uses a 3 to 6 mm bead chain (not a cordless spring blind or a continuous cord loop without beads). Battery or USB-C — mount it anywhere Because it has a built-in rechargeable lithium battery, you can mount the driver at a window with no power point nearby. A charge lasts about two months in typical use (driving a 1.8 x 1.8 m shade up and down once a day), and a full charge takes around 2 hours 30 minutes over the 5 V / 1 A USB-C port. Prefer never to recharge? Leave the included USB-C cable plugged in for continuous power. One caveat worth knowing: the driver does not support manual hand-operation when it is switched off, so keep it charged or wired. Smart control and automation through your Aqara hub The driver connects over Zigbee 3.0 and needs an Aqara Zigbee hub — such as the Aqara M2 Hub or the flagship Aqara Hub M3 — within about 30 m. Once paired it works in the Aqara Home app and, through a compatible hub, in Apple Home, Amazon Alexa, Google Home and IFTTT, so you can raise and lower your blinds by voice or on a tap. Set daily or weekly schedules, open to sunrise or sunset, and pre-set your favourite open and closed positions (open to 80%, say). Through the hub it can also respond to other Aqara devices — lower the blind when a light sensor reads bright sun, or open it when a door sensor sees you arrive home. With the network off, local button and sensor-linkage control still work; only app remote control needs the connection. Roller Shade Driver E1 or a curtain driver? The Roller Shade Driver E1 is for blinds on a beaded chain. If you want to automate curtains instead, the Aqara Smart Curtain Driver E1 (Track Version) is the battery driver that clips onto a curtain rod or track, and the Aqara Smart Curtain Motor is a wired track motor for heavier curtains. Choose this driver for roller, zebra or venetian blinds; choose a curtain driver or motor for curtains. Specifications Model RSD-M01 Type Retrofit motor for beaded-chain roller, zebra and venetian blinds Bead chain Plastic or metal beads, 3 to 6 mm (4 adapters included) Motor torque 0.45 N·m Maximum load 5 kg @ 38 mm tube · 3.7 kg @ 28 mm tube Power Built-in rechargeable lithium battery (about 2 months/charge) or wired USB-C Charging 5 V / 1 A USB-C · full charge about 2 h 30 min · 5 W Wireless Zigbee 3.0 (Aqara hub required, within about 30 m) Ecosystems Aqara Home · Apple Home · Alexa · Google Home · IFTTT (via the hub) Control App · button · voice · schedules sensor automations Power-off manual use Not supported — keep it charged or wired Dimensions 42 x 37 x 165 mm · White Operating temperature −10 °C to 55 °C Operating humidity 0 to 95% RH, non-condensing Mounting Screw or double-sided adhesive tape What’s in the box Aqara Roller Shade Driver E1 (RSD-M01) x 1, with bead-chain adapters Screws x 2 and expansion tubes x 2 Double-sided adhesive tape x 1 Spare rotating plates x 3 USB-C to USB-A cable x 1 User manual Note: an Aqara hub is required and sold separately. No power adapter — a USB-C to USB-A cable is included; PassionHome does not bundle power adapters on Aqara products. Warranty and authorised-dealer details PassionHome.sg is an Authorised Aqara Dealer in Singapore. The Roller Shade Driver E1 carries the official 24-month Aqara manufacturer warranty, serviced at the Aqara Service Center in Singapore. Reach us on WhatsApp 65 9051 7063 to check your blind’s bead chain, choose the right Aqara hub, or for a warranty claim. Frequently asked questions Will the Roller Shade Driver E1 fit my blinds? It works with roller, zebra (Korean) and venetian blinds that are operated by a beaded chain — plastic or metal beads, 3 to 6 mm thick. Four adapters are included to match the common bead sizes. It drives your existing bead chain, so it does not replace the blind. It will not work on cordless spring blinds or continuous-cord-loop blinds without a bead chain. How heavy a blind can it lift? Up to 5 kg with a 38 mm shade tube, or 3.7 kg with a 28 mm tube, from a 0.45 N·m motor. Aqara does not publish a maximum blind width — the load is governed by the tube diameter above. WhatsApp us your blind details and we can confirm the fit. Is it battery-powered or wired? Either. It has a built-in rechargeable lithium battery that lasts about two months per charge (driving a 1.8 x 1.8 m shade up and down once a day), so you can mount it at a window with no power point. Or run it permanently from the included USB-C cable. A full charge takes about 2 hours 30 minutes; it charges over a 5 V / 1 A USB-C port. Does it need an Aqara hub? Yes. The driver is a Zigbee 3.0 device and needs a compatible Aqara Zigbee hub (within about 30 m) for app control, scheduling, voice control and automations. Which smart-home platforms does it work with? Aqara Home natively, plus Apple Home, Amazon Alexa, Google Home and IFTTT through a compatible Aqara hub — so you can open and close your blinds with Siri, Alexa or Google, or on a schedule. Can it open my blinds automatically? Yes. Set daily or weekly schedules, or sunrise and sunset times, and pre-set the open and closed positions (for example open to 80%). Through your hub it can also respond to other Aqara devices — a light sensor can lower the blind when the sun is bright, or a door sensor can open it when you arrive home. How is it installed? In about five minutes, in three steps: screw the device to the wall (or use the included double-sided tape), attach the right adapter for your bead size, and insert the beaded chain. No tools beyond the included screws are needed. Can I still use the blind if the device is off? No — the Roller Shade Driver E1 does not support manual hand-operation when it is powered off, so keep it charged or wired. With the network off, local button and sensor-linkage control still work; only app remote control needs the network. Is the Roller Shade Driver E1 covered by warranty in Singapore? Yes. It carries the official 24-month Aqara manufacturer warranty, serviced at the Aqara Service Center in Singapore. PassionHome.sg is an Authorised Aqara Dealer. WhatsApp 65 9051 7063 to check your bead chain, choose a hub, or for a warranty claim. Related Aqara products Entry Zigbee hub (required): Aqara M2 Hub — the value hub to connect and control the driver. Flagship hub: Aqara Hub M3 — adds Matter bridging and more capacity. For curtains, not blinds: Aqara Smart Curtain Driver E1 (Track Version) — a battery driver that clips onto a curtain rod or track. Browse the full Aqara range: /product-category/aqara/. Accuracy note: We work hard to keep product details, specifications, and prices on PassionHome.sg accurate, but occasional errors or omissions can occur. If you spot something incorrect, message us via WhatsApp 65 9051 7063 — we’ll review and correct it. PassionHome.sg accepts no liability for purchase decisions made on the basis of inaccurate or outdated information; please confirm any critical detail with us before placing an order if it’s material to your decision.
