Aqara Temperature and Humidity Sensor T1 – Global Edition
$ 23.01
- Description The Aqara Temperature and Humidity Sensor T1 is a compact Zigbee 3.0 sensor that measures temperature, humidity and atmospheric pressure — a tiny three-in-one weather station for your home. It reports readings to the Aqara Home app through an Aqara hub, keeps a history you can graph, and can trigger automations — for example switching on a fan or dehumidifier when a room gets too humid. It runs on a single CR2032 coin cell for up to two years. The T1 is a button-only sensor with no on-device screen. Why buy the Temperature and Humidity Sensor T1 in Singapore Three readings in one. Temperature (±0.3°C), humidity (±3%) and atmospheric pressure (30 to 110 kPa, ±0.12 kPa) — most room sensors only do two. Great for Singapore homes. Track humidity to spot mould risk, protect electronics and instruments, and keep rooms comfortable in our climate. Automations through your hub. Trigger an Aqara smart plug to run a fan or dehumidifier when humidity climbs, or get a notification when a room leaves your comfort zone. Up to 2-year battery. One replaceable CR2032 coin cell; no wiring and no power adapter. Tiny and discreet. 36 x 36 x 9 mm; stick it with the included sticker or set it on a shelf. What it measures — temperature, humidity and pressure At its heart the T1 is a temperature and humidity sensor, and it adds an atmospheric-pressure reading on top. Temperature is accurate to ±0.3°C across −20 to 50°C, humidity to ±3% across 0 to 100% RH, and atmospheric pressure to ±0.12 kPa across 30 to 110 kPa. There is no screen on the device — the T1 sends its readings to your Aqara hub and the Aqara Home app, where you see live values and historical graphs. When the environment is stable it reports about once an hour; it reports instantly when the temperature shifts more than 0.5°C, humidity more than 6%, or pressure by at least 25 Pa. Connectivity — Zigbee 3.0, hub required The T1 uses Zigbee 3.0 and is a child device of an Aqara hub — it cannot connect to your phone directly, so an Aqara Zigbee hub is required. Indoors it stays connected to the hub up to about 10 metres (walls permitting). It is a Zigbee sensor, not natively certified for Matter; it is exposed to Matter ecosystems only when bridged through a Matter-controller Aqara hub such as the Aqara Hub M3. The entry-level Aqara M2 Hub works as a Zigbee hub for it too. Specifications Model TH-S02D Measures Temperature, humidity and atmospheric pressure Temperature Range −20 °C to 50 °C, accuracy ±0.3 °C Humidity Range 0 to 100% RH, accuracy ±3% Atmospheric pressure Range 30 to 110 kPa, accuracy ±0.12 kPa Display None — button-only; reports to the Aqara hub and app Wireless protocol Zigbee 3.0 Power 1 x CR2032 coin cell · up to 2-year battery life Dimensions 36 x 36 x 9 mm (1.42 x 1.42 x 0.35 in.) Hub required Yes — an Aqara Zigbee hub Matter Not native — exposed to Matter when bridged via a Matter-controller Aqara hub (e.g. Hub M3) Use Indoor only What’s in the box Temperature and Humidity Sensor T1 x 1 Sticker x 1 User Manual x 1 Note: no power adapter — the T1 is battery-powered (CR2032). PassionHome does not bundle power adapters on Aqara products. Works with your smart home The T1 works natively in the Aqara Home app through an Aqara hub, where you get history graphs, comfort-zone alerts and cross-device automations. Through a HomeKit-bridging Aqara hub it also appears in Apple Home; through a hub that supports them, the readings can surface in Amazon Alexa and Google Home as well. Ecosystem availability is mediated by the bridging hub, not the sensor itself. Warranty and authorised-dealer details PassionHome.sg is an Authorised Aqara Dealer in Singapore. The Temperature and Humidity Sensor T1 carries the official 24-month Aqara manufacturer warranty, serviced at the Aqara Service Center in Singapore. Reach us on WhatsApp 65 9051 7063 for help with setup, hub pairing or a warranty claim. Frequently asked questions Does the Temperature and Humidity Sensor T1 measure air pressure? Yes. The T1 is a three-in-one sensor: it measures temperature (±0.3°C), relative humidity (±3%) and atmospheric pressure (30 to 110 kPa, ±0.12 kPa). The pressure reading makes it a tiny weather station as well as a comfort sensor. Does the T1 have a display or screen? No. The T1 is a button-only sensor with no on-device screen. It reports its temperature, humidity and pressure readings to your Aqara hub and the Aqara Home app, where you can see live values and historical graphs. The single button is used to check connectivity and to pair or reset the device. Does the T1 need a hub? Yes. The T1 is a Zigbee 3.0 child device and cannot connect to your phone directly — it needs an Aqara Zigbee hub. Connect the hub to your phone first, then add the T1 to the hub. Is the T1 a Matter device? The T1 is a Zigbee 3.0 sensor, not natively certified for Matter. It is exposed to Matter ecosystems only when it is bridged through a Matter-controller Aqara hub such as the Aqara Hub M3, which surfaces it to Matter platforms. How long does the battery last? The T1 runs on a single CR2032 coin cell for up to two years of normal use, and the cell is user-replaceable. The product SKU itself is rated for a 2-year service window. Which smart-home platforms does the T1 work with? Aqara Home natively, and Apple Home through a HomeKit-bridging Aqara hub. Through a hub that supports them, the readings can also surface in Amazon Alexa and Google Home; ecosystem availability is mediated by the bridging hub, not the sensor itself. How often does the T1 report its readings? When the environment is stable the T1 reports about once an hour. It reports instantly when something changes significantly — a temperature change over 0.5°C, a humidity change over 6%, or an atmospheric-pressure change of at least 25 Pa. It can push a notification when a room moves out of your set comfort zone. Is the T1 for indoor use? Yes, the T1 is for indoor use only. Avoid placing it where it is exposed to rain or vapour, and avoid the refrigerator, kitchen or washroom. Stick it with the included sticker or simply set it on a shelf. Is the T1 covered by warranty in Singapore? Yes. It carries the official 24-month Aqara manufacturer warranty, serviced at the Aqara Service Center in Singapore. PassionHome.sg is an Authorised Aqara Dealer. WhatsApp 65 9051 7063 for help with setup or a warranty claim. Related Aqara sensors and hubs Display climate sensor: Aqara Climate Sensor W100 — a temperature and humidity sensor with a 3.4-inch screen and smart buttons, if you want an at-a-glance display. Matter / Thread hub: Aqara Hub M3 — bridges the T1 to Matter ecosystems and controls your aircon by IR. Entry Zigbee hub: Aqara M2 Hub — the value hub for running the T1 and other Aqara Zigbee accessories. Browse the full Aqara range: /product-category/aqara/. Accuracy note: We work hard to keep product details, specifications, and prices on PassionHome.sg accurate, but occasional errors or omissions can occur. If you spot something incorrect, message us via WhatsApp 65 9051 7063 — we’ll review and correct it. PassionHome.sg accepts no liability for purchase decisions made on the basis of inaccurate or outdated information; please confirm any critical detail with us before placing an order if it’s material to your decision.
