Aqara P1 Motion Sensor – Global Edition
$ 27.19
- Description The Aqara Motion Sensor P1 is a Zigbee 3.0 PIR motion sensor with a built-in light sensor — so your lights, scenes and security alerts can react the moment someone moves, and only when the room is dark enough to need them. It detects across a wide 170° field of view, runs up to five years on two coin cells, and lets you tune both sensitivity and re-trigger time in the Aqara Home app. A compatible Aqara Zigbee 3.0 hub connects it to Apple HomeKit, Amazon Alexa, IFTTT and Aqara Home. Why buy the Aqara Motion Sensor P1 in Singapore Wide, tiered detection. About 170° coverage up to 2 m, and up to 7 m of reach — good for corridors, foyers, stairwells and bedrooms. Built-in light sensor. Trigger lights only when it is actually dark, so daytime motion does not switch them on. Tunable sensitivity and timeout. Three sensitivity modes plus a 1–200 second timeout help cut false triggers and avoid lights that stay on too long. Up to 5-year battery life. Two CR2450 coin cells; no wiring and no adapter. Easy, tool-free placement. A 360° rotatable stand and sticker let you aim it upright, on a wall, on a shelf, or upside down. Works with the platforms you use. Apple HomeKit, Amazon Alexa, IFTTT and Aqara Home through a compatible Aqara hub. Motion plus light, for smarter automations Beyond simple motion, the P1 reads the ambient light level with a built-in lux sensor. That lets you build automations that only fire when they should — for example, turn on a hallway light when motion is detected and brightness is below the level you set, or arm an away-mode alert that sends a notification and sounds a local alarm through your Aqara hub when movement is detected while you are out. Tune it to your space Sensitivity: three modes (high, medium, low) that change the triggering distance to suit the room and cut false alarms. Detection timeout: adjustable from 1 to 200 seconds, so lights can switch off promptly instead of waiting a fixed minute. Pet-aware placement: mount higher and angle the sensor so floor-level pet movement stays outside the detection zone. OTA updates: the P1 supports over-the-air firmware updates, so new features and fixes can be added over time. Apple HomeKit, Alexa, IFTTT and Aqara Home The Motion Sensor P1 is a Zigbee 3.0 device, so it connects to smart-home platforms through a compatible Aqara Zigbee 3.0 hub such as the Aqara Hub M2 or the flagship Aqara Hub M3. With a hub in place, the P1 works with Aqara Home, Apple HomeKit, Amazon Alexa and IFTTT. Matter is delivered as a bridged feature through a compatible Aqara hub rather than on the sensor itself. Installation and placement in Singapore homes Indoor use. Recommended mounting height 1.2 to 2.0 m, near the edge of a shelf, cabinet or wall. No tools needed. Use the included 360° rotatable stand and sticker; choose upright, wall, no-stand or upside-down placement. Avoid false triggers. Do not aim the sensor at heat sources or air-conditioner vents, and avoid metal surfaces that can interfere with the Zigbee signal. Surface care. Avoid tile, glass, marble and other smooth or moist surfaces so the adhesive holds. Specifications Model MS-S02 Colour White Sensor type PIR motion built-in light (lux) sensor Detection About 170° at up to 2 m; about 150° at up to 7 m Sensitivity 3 modes (high / medium / low — adjusts triggering distance) Detection timeout Adjustable 1–200 seconds Wireless protocol Zigbee 3.0, 2.4 GHz (compatible Aqara hub required) Battery 2 x CR2450 (1240 mAh) · up to 5 years Dimensions 33.1 x 33.1 x 41.6 mm Weight 33 g Operating temperature −10°C to 55°C Operating humidity 0 to 95% RH, non-condensing Ecosystems Aqara Home · Apple HomeKit · Amazon Alexa · IFTTT (Matter bridged via a compatible Aqara hub) What’s in the box Aqara Motion Sensor P1 x 1 Sensor holder (stand) x 1 Sticker x 1 User Manual x 1 Note: the P1 is battery-powered (2 x CR2450) and needs no power adapter. PassionHome does not bundle power adapters on Aqara products. Warranty and authorised-dealer details PassionHome.sg is an Authorised Aqara Dealer in Singapore. The Motion Sensor P1 carries the official 24-month Aqara manufacturer warranty, sourced through official Aqara distribution channels and serviced at the Aqara Service Center in Singapore — no overseas RMA. Need help choosing a compatible hub or planning your automations? WhatsApp us on 65 9051 7063. Frequently asked questions Does the Aqara Motion Sensor P1 need a hub? Yes. The P1 is a Zigbee 3.0 sensor and needs a compatible Aqara Zigbee 3.0 hub such as the Hub M2 or Hub M3 to connect. The hub is what runs your automations and links the sensor to Apple HomeKit, Amazon Alexa, IFTTT and the Aqara Home app. Which smart-home platforms does the P1 work with? Through an Aqara Zigbee 3.0 hub, the Motion Sensor P1 works with Aqara Home, Apple HomeKit, Amazon Alexa and IFTTT. Matter support is delivered as a bridged feature via a compatible Aqara hub rather than on the sensor itself. How far and how wide does the P1 detect motion? The P1 uses a PIR sensor with a tiered field of view: about 170° coverage at up to 2 metres, narrowing to about 150° at its maximum range of up to 7 metres. You can fine-tune how far it triggers using the three sensitivity modes. Can I adjust sensitivity and the re-trigger time? Yes, both in the Aqara Home app. Three sensitivity modes (high, medium, low) change the distance at which the sensor triggers, and the detection timeout is adjustable from 1 to 200 seconds, so a light can switch off quickly instead of staying on for a fixed minute. Does the P1 have a light sensor? Yes. A built-in light (lux) sensor lets you trigger automations only when it is dark enough — for example, turn on the lights only when motion is detected and brightness is below a level you set in the app. What battery does the P1 use and how long does it last? The P1 runs on two CR2450 coin cells (1240 mAh total) and can last up to five years. Aqara notes the five-year figure assumes the LED indicator is turned off and the detection timeout is set to at least 30 seconds. Will a pet trigger the Motion Sensor P1? It can. If you do not want a pet to trigger it, mount the P1 higher up and angle it so that floor-level pet movement falls outside the detection area, as shown in the quick-start guide. Why does the P1 sometimes report motion when no one is there? PIR sensors react to moving heat. Hot objects in the detection area, or a large hot-and-cold airflow such as an air-conditioner vent, can cause a false trigger — so avoid pointing the sensor directly at appliances or vents, and avoid smooth, glossy or high-temperature surfaces for the adhesive. Where should I install the Motion Sensor P1? Indoors, at a recommended height of 1.2 to 2.0 metres, on a clean flat surface near the edge of a shelf, cabinet or wall. The included 360° rotatable stand and sticker need no tools. Avoid metal surfaces, which can interfere with the Zigbee signal. Related Aqara products Entry Zigbee hub: Aqara Hub M2 — Zigbee 3.0 hub to connect and automate the Motion Sensor P1. Flagship hub Matter bridge: Aqara Hub M3 — adds Matter bridging and more capacity. Browse all Aqara sensors: /aqara-smart-sensors/. Accuracy note: We work hard to keep product details, specifications, and prices on PassionHome.sg accurate, but occasional errors or omissions can occur. If you spot something incorrect, message us via WhatsApp 65 9051 7063 — we’ll review and correct it. PassionHome.sg accepts no liability for purchase decisions made on the basis of inaccurate or outdated information; please confirm any critical detail with us before placing an order if it’s material to your decision.
